ESP32 Camera MicroPython IoT Device for Trading BOT Automation and Analysis:

ESP32 Camera USB COM Connection, Putty Configuration and Running MicroPython Programme:

For Instructions Watch The Video Here:

Programmes Contained in the ESP32 Camera Board:

boot.py

# This file is executed on every boot (including wake-boot from deepsleep)
#import esp
#esp.osdebug(None)
#import webrepl
#webrepl.start()

main.py

from machine import Pin
from neopixel import NeoPixel
import time

pin = Pin(48, Pin.OUT)
np = NeoPixel(pin, 1)
np[0] = (10,0,0)
np.write()
r, g, b = np[0]

print("RGB Demo")

while True:

    print("50%R")
    np[0] = (127, 0, 0)
    np.write()
    time.sleep_ms(1000)

    print("50%G")
    np[0] = (0, 127, 0)
    np.write()
    time.sleep_ms(1000)

    print("50%B")
    np[0] = (0, 0, 127)
    np.write()
    time.sleep_ms(1000)

Blinking RGB LED Output:

Open CMD and Type this to Erase Flash:C:\Users\VIKASH\Desktop\arduino\esp32_camera> python -m esptool --port COM7 erase-flash

Open CMD and Type this to Write Flash to upload Firmare in ESP32 S3 Camera Board:C:\Users\VIKASH\Desktop\arduino\esp32_camera>python -m esptool --port COM7 --baud 460800 write-flash -z 0x0 firmware.bin